|
| Home | | Crowcon Single Gas - Gasman | |
|
|
|
|
Gasman
Intrinsically Safe Personal Single Gas Monitor
The Gasman full function personal single gas monitor is compact and
lightweight yet is fully ruggedised for the toughest of industrial
environments. Featuring simple single
button operation, it has a large easy-to-read display of gas
concentration, and audible, visual and vibrating alarms.
Gasman is a range of rugged,
compact single gas personal monitors designed for use in the toughest
environments. Its stunningly compact and lightweight design makes it
ideal for use in industries such as oil and gas, chemical plants (with
exotic gases), steel works (special CO sensor), hospitality (CO2) and waste and water works.
Weighing just 130g, it is extremely
durable, with high impact resistance and dust/water ingress protection,
loud 95 dB alarms, a vivid red/ blue visual warning, single-button
control and an easy-to-read, backlit LCD display to ensure clear viewing
of gas level readings, alarm conditions and battery life. Data and
event logging are available as standard, and there is a built-in 30 day
advance warning when calibration is due. Gasman is also available in a safe area CO2 version offering 0-5% carbon dioxide measurement.
- Tough polycarbonate housing - protects you in the harshest environments
- Water and dust resistant to IP65
- Full overmoulding - high impact resistance
- 2 levels of instantaneous alarm and TWA alarms for toxic versions - ensures prompt evacuation from hazardous zone
- 95dB audible alarm
- Vivid twin red/blue visual alarm - if ambient noise is high, Gasman alerts you by vibrating and with the high impact blue/red LED alarms
- Internal vibrating alarm
- Versions available for flammable gas, oxygen and toxic gases - gas detector tailored to your requirements
- Rechargeable versions for all gas types
- Non-rechargeable versions for oxygen and toxic gases
- Real-time TWA and peak display options
- Fully interchangeable intelligent sensor modules
- One button operation - quick and easy to use
- Backlit display for gas diagnostics and operating status - easy to read
- Ultra lightweight; just 85g for toxic versions - comfortable to wear
C02132 Gasman External Filter
- For use in high dust environments such as steel plants.
|
C01844 Chest harness strap kit
- Consists of two straps (harness plate sold separately).
|
- Enables detector to be worn using the shoulder strap or chest harness straps.
|
- Shoulder strap. Use with harness plate.
|
C01937 Aspirator assembly
- Manual device for drawing gas samples.
|
- To enable calibration or manual gas sampling.
|
C01983 Leather carry case
- Enables unit to be worn either on a belt or with a shoulder strap.
|
C01953 Hard hat clip
- Harness to enable Gasman to be attached to a safety helmet.
|
- Charger cradle. Select power supply option.
|
C01296 Charging lead for vehicle lighter socket
- Use with 12V DC input charger cradles C01941 or C01940.
|
C011305 Charger Interface Software and Communication Kit, excluding PSU
- Charger Interface Communication Kit (includes single way
charger/interface, USB-RS232 adaptor and PC lead. Use standard charger
PSU or select from voltage options eg E01546 for EU 230V PSU)
|
- Replacement Power Supply Units (PSU) for use with cradle, multiway and
interface chargers or in combination with Charger Interface
Communication Kit (C011305)
|
E07532 PC Lead (9 way D, Female - Female)
- For use with PC Interface Charger. See also Charger Interface Communication Kit, C011305.
|
Single Way PC Interface Charger
- Charger cradle with PC interface connection to allow data download and
instrument configuration. Requires F-F PC lead (E07532) and either an RS
232 connection or RS 232 to USB convertor (C02097). Select power supply
option
|
5 Way Multi-Charger
- To recharge 5 Gasman units at once. Select power supply option.
|
|
|
|
|
|
|
|
Ancor Sdn Bhd
D-2-4, Setiawalk, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: +6012-921 3877; +6018-623 5135,
Fax: 6018-635 1593
Email: info@ancor.com.my ; ancor.my@gmail.com
|
|
|
 |
|